Functional 150 x 30 cm LED ceiling light as a refurbishment light and replacement for 2 x 58 watt 150 cm T8 tubes. The 150 x30 LED panel ceiling light with simple surface-mounted frame normally covers the dimensions of an existing louvre luminaire and replaces it with little effort. This 1500 x300mm ceiling light provides up to 4800 lumens of luminous flux (4000K) with 40W power consumption.
The model is offered as a simple, cost-effective refurbishment luminaire. On request, this functional ceiling light can also be ordered with a slightly higher quality plug-in surface-mounted frame.
The LED panel produces a very attractive, homogeneous, evenly distributed light with no major glare effects. A low power consumption of just under 40 watts makes it an efficient light source and generates a luminous flux of up to 4800 lumens. The surface is made of non-yellowing PMMA plastic.
A flicker-free Philips® CertaDrive brand power supply unit is included as standard. Several dimming options can be offered on request.
The 150x30cm LED ceiling light is available in various light colours:
- 6000K daylight white (860)
- 3000K warm white (830)
- 4000K neutral white (840)
- 4000K neutral white UGR (840) with UGR<19 glare-free for computer workstations
The 150 x30cm 4000K UGR ceiling light is specially equipped with a glare-free surface. The 150x30cm refurbishment luminaire is ideally suited for office work as an office ceiling luminaire in accordance with VDU workplace guidelines thanks to its glare-free surface with UGR<19.
- General lighting in corridors or shops - Office and workplaces - LED panel in conference rooms - in doctors' surgeries or waiting rooms - Corridors and hallways or stairwells - Replacement for 2 x 58 watt louvre luminaires
The large surface area generates a lot of light without causing too much glare. Nevertheless, dimming may be advisable in certain circumstances, for example when there is a lot of daylight. As accessories, we supply dimmable power supply units with DALI dimming, 1-10 volt dimming (via separate dimming cable) or alternatively dimming via leading edge/trailing edge phase dimming.
1st Dali 2 dimmable power supply unit for use in the DALI BUS. Requires a 2-wire dimming cable
2. 1-10V dimming requires a thin control cable and a suitable 1-10Volt wall dimmer. In existing buildings, however, there is usually no 5-core cable for a dimming line!
3. dimming via leading edge phase control dimming / trailing edge dimming. This type of dimming comes very close to the classic dimming of incandescent lamps via the power line. This type of dimming is suitable for smaller installations with a maximum of 4-6 luminaires. We offer suitable power supply units for this, which have a very good dimming curve without jumps in dimming and low noise levels. However, an LED-compatible wall dimmer that can dim LED luminaires is required.
Light colour 840: 4000 Kelvin (neutral white) | Power consumption: 40 watts | Frame colour: white | Dimensions: 1495mm x 295mm x H: 50mm (50mm with LED power supply unit and frame) | Manufacturer's guarantee: 5 years | Luminous flux: 4800 lumens (at 4000K neutral white) 4300 at 3000K | Power supply: 200V to 240V | Luminous efficacy Lm/W: 120 lm/W | COS-phi: >0. 9 | Colour rendering RA 85 | Beam angle: 120° | IP 41 | Frame: Aluminium |Dimmable: No - dimmable power supply unit available | Specified service life (manufacturer's specification): 50,000 hours | Operating temperature: -20 ~45'C | Humidity in use: 10-70% | | Long-term stable and non-yellowing PMMA light guide plate | Power: 40 watts
Do you have questions about our LED panels? As a technical energy manager TÜV Süd, efficiency is our business. We are happy to advise you! Preferably in person! You can reach us on the telephone number: 0221-29821660 during our business hours or by mobile phone. You can also contact us by e-mail form or fax enquiry. We will also be happy to call you back.
Blls ledlighting B.V | Nijverheidsweg-Noord 75 (3812 PK) | Amersfoort | The Netherlands | E-Mail: sales006@bllsledlighting.com
