150W adjustable LED highbay / LED object floodlight IP66 Philips® LEDs

150W adjustable LED highbay / LED object floodlight IP66 Philips® LEDs

Flexibly adjustable LED hall floodlight / LED object floodlight with bright 21,000 lumen luminous flux at 5000Kelvin daylight white. The three horizontally adjustable luminaire units each produce 7000 lumens of luminous flux and can thus brighten up specific areas or focus the light particularly. This allows the light to be directed in a targeted manner. This is always used where individual areas need to be brightened or highlighted. The model is dimmable via 1-10V interface as standard.

The adjustable object spotlight is suitable for mounting on a ceiling, but can also be mounted very well on walls, walls or directly on the floor using the mounting bracket. In addition to illuminating rooms from the ceiling, installation allows the spotlight to be used for illuminating objects, for example outdoors.

The light colour of the variable LED hall spotlight is a pleasant 5000K daylight white. The efficiency of 140 lumen / watt is extremely high. The manufacturer gives 5 years warranty on this model.

Top processing, 1-10V dimmable and exclusive use of brand components

The bright 21,000 lumens luminous flux is generated by this model. This corresponds to an efficiency of 145 lumen / watt. This LED hall lighting replaces an old 350W -400W HQL spotlight This adjustable Vario LED hall spotlight or LED object spotlight relies on high-quality components. Both the LED chips and the power supply are from Philips®.

The model is clean and very robust and can easily compete with significantly more expensive models. Dimming: The variably adjustable LED indoor spotlight can be dimmed as standard via 1-10V interface (2-wire dimming cable) This enables the use of daylight sensors directly on the indoor spotlight or dimmable 1-10V Dali converters.

Fire protection D-mark and TÜV/GS certification.

This 150W LED hall lighting has a certification with the fire protection "D"-mark (formerly FF sign) according to DIN EN 60598-2-24, which makes it especially suitable for fire hazard areas such as joineries, woodworking industry or companies that work with combustible dusts or fibres. In agricultural stables, the use of luminaires with D-plates for fire protection is also required. Tested with TÜV / GS certificate for confirmed high electrical safety.

IK10 Impact resistance and IP66 protection class

The adjustable LED spotlight / adjustable indoor spotlight comes with the impact class IK10 (EN 50295:98). This corresponds to a hit with a 5kg hammer from a distance of 40cm. With an IP protection class of IP66, the LED diffuser luminaire is very good against the ingress of dust and also against water. Water, which is directed from any direction as a strong jet against the housing, does not cause any damage.

Reduced glare with UGR<22

The model is glare-reduced. With a beam angle of 102° a good UGR of less than 22 is achieved. Compared to the classic UFO indoor spotlights, this LED spotlight is very well suited for crane traffic in production halls or forklift traffic in shelf warehouses.

At the end of its service life, the model still reaches 80% of the specified luminous flux (LM80 / TM21 test) The service life is stated by the manufacturer at 50,000 hours.

Technical data LED hall floodlight dimmable 150W

Voltage 100-277VAC/50/60Hz | Light colour: 5000 K (daylight) | Luminous flux: 21,000 lm± 5% | Service life: 50.000 hours | Efficiency: 140Lm/Watt | LED Chips: Philips® | | Power supply: Philips® Efficiency: > 90% | Power consumption:150Watt | Power factor: cos phi > 0.95 | CRI >70 | Operating temperature: -20°C to +50°C | Glare: UGR<22 | Beam angle: 102° (adjustable by alignment of light units) |

Dimming: The LED spotlight can be dimmed as standard via 1-10V interface (2-wire dimming cable) This enables the use of daylight sensors directly on the spotlight or dimmable 1-10V Dali converters.

Certificates: TÜV 7 GS | Fire protection -D- | Shock resistance: IK 10 | Protection class: IP 66 | Dimensions: Diameter 296mm / Height: 177mm / | Mounting: Eyelet or metal bracket | Energy efficiency: A++ | Power consumption 1000 hours: 150 kWh | L80 /B10 | TM21 test | Manufacturer's warranty: 5 years | Installation options: Ceiling mounting via ring eyelet or bracket / wall mounting or floor mounting via mounting bracket. Dimensions: length: 373mmx width 275mm x 110mm

Accessories and other variants on request:

The model is also available as 100W, 200W, 300W, 400 W, 450W and 600W variant. However, not as stock goods with short-term delivery options. For larger quantities, for example, the light colour can also be selected with 4000K neutral white or 57000K cold white.

Consulting:

Do you have any special questions about our LED indoor spotlights in the different versions and their special application? As technical energy manager TÜV Süd, efficiency is our business. We are happy to advise you! Preferably personally! You can reach us under the telephone number: 0049-221-29821660 during our business hours or by mobile phone. You can also contact us via e-mail form or fax inquiry. We will also call you back.