Led fluorescent tube with socket 2x150cm VDE tested by LG 2x 2500 Lumen
Inexpensive combination of LED tube and a 2x 150cm T8 2-lamp LED tube holder. The LED fluorescent tube 150cm with VDE test. has undergone a particularly stringent test in terms of electrical safety. It is therefore very suitable for most commercial and industrial applications.
T8 Led fluorescent tube with only 23W power consumption on bright 2500 lumens. With 2 tubes you get a very bright 5000 lumen luminous flux.
This 150cmLed fluorescent tube is available with VDE in 4000K neutral white (840) or 5000 Kelvin daylight white. (850). The beam angle is 180° with an efficiency of 110 lumen / watt.
The cool daylight white with 5000 Kelvin (850) is very pleasant and produces no disturbing blue tone in the light. The beam angle of 180° ensures a far-reaching, even distribution. This combination is therefore perfectly suited for horizontal wall mounting.
Advantages and technical data of the Led fluorescent tube with socket 2x150cm
Simple installation. Some of the existing holders and mounts have become very old, burned down and cannot be rotated easily. It is worthwhile to replace it with a new carrier system.
150cm socket especially for LED tubes. The socket does not use a ballast and does not require a starter. Only the current for the T8 LED tube is actually consumed. No additional loss for ballasts.
LG-Electronics LED tube brands with VDE certification
Luminous flux: High luminous flux of 2540 lumens (850 / 5000 Kelvin) or 2400 lumens at 4000K (840) | THD% < 30 | 180° beam angle
CRI>80 | 23 watts power consumption | Efficiency of 110 lumens / watts | Specified lifetime: 40,000 hours
High electrical safety due to VDE testing and corresponding certificate
Good energy efficiency values of this LED tube lamp of 110 lumen / watt power consumption
Scope of delivery:
1x 150cm T8 LED-Tubes Tube Socket 2-flame for single-ended LED-Tubes
2x 150cm T8 LED tube by LG Electronics. Light colour according to your choice
Optionally also available as single flame version in 120cm. as well as a 1 flame LED tube with socket 150cm
Long service life and high energy savings
Saves up to 60% of electricity costs compared to the classic fluorescent tube. With better light quality than before.
Long realistic life expectancy of well over 40,000 hours (10 years at 10 hours a day and 365 working days)
Replaces a conventional 58Watt fluorescent tube
| tube type: | frosted |
| Product category: | LED ready batten fittings |
| color temperature: | 4000k (Kelvin) 5000 Kelvin |
| length: | 150cm |
| material: | Plastics (PKW) aluminium |
| socket: | G13 -T8 socket |
| no. of lamps: | 2 lamps |
| beam angle: | 180° degree |
| socket fitting: | No |
| power consumpt.: | 23 Watt 56W |
| colour rendering (CRI): | RA >80 |
| efficiency in lm/W: | 110 lm/watt light output |
| Application: | professional use |
| average life cycle: | 40.000 hours |
| energy efficiency class: | A+ |
| time to reach full lumination: | directly |
| consumption per 1000 hrs: | 56 kWh |
| diamter (outside measures): | 28mm |
| power input: | Single sided |
| IP-Class: | IP 20 |
| Power supply: | 230V 50/60 Hz ( 220V - 250V) |
| Operat. temperature: | -10°C to 45°C |
| tests / audits: | VDE geprüft, CE, EMC/EMV, Rohs |
| warranty: | standard legal regulations apply |
| Additional information:: | can only be used inside buildings |
| Product weight: | 1,20 Kg |
For an efficient conversion from T8 fluorescent tubes to T8 LED tubes, the existing tube socket should always be considered. The conversion of conventional ballasts to LED tubes is very easy with the aid of an LED dummy starter. Nevertheless, it makes sense to take a close look at the existing versions that need to be converted.
Wide range of sockets and holders for T8 LED tubes
We offer a wide range of sockets for LED tubes. In the usual sizes 150cm (5-foot) as 1-burner or 2-burner version, as light fixture for 120cm (4-foot) T8 LED tubes and as 90cm LED tube holder and LED tube holder 60cm. 
Increased electrical safety through new LED tube sockets
In many cases the installed tube sockets are very old, dilapidated and stiff. Are the ends of the tube sockets black or burned and the insertion of new tubes is stiff? Then it is definitely worth considering the purchase of new LED tube sockets. This increases electrical safety during operation and ensures optimum interaction between the T8 LED tube and the matching light strip.
Replacement of old LED tube holders = lower power consumption
Higher power consumption due to ballasts Existing tube sockets with ballasts continue to consume power even after conversion. Depending on the model, this can be between 7-15W per hour of additional and unneeded power consumption. With many installed tubes there quickly come some kWh per year, which must be paid. Even if technically this is not necessary. In the course of a conversion to T8 LED tubes, many companies are also converting the sockets to new LED tube sockets. Not only is the lighting system being properly refurbished, customers also save up to 10% additional electricity.
Advice on whether the sockets fit your tubes?
We will be happy to advise you whether our T8 LED Tube Holders and LED Tube Holders fit your LED Tubes. Just give us a call on 0049-221-29821660.
Compatible: 150cm LED-ready fixtures
5ft LED batten fitting
