LED workshop light 200W in 5500K daylight Philips LEDs 28.000 Lumen IP65
Very reliable and inexpensive LED workshop light in 5500K daylight in various power classes of 100 Watt, 150 Watt, 200 Watt and a very bright 240W variant. The LED indoor spotlight comes with very high quality and reliable Philips® LEDs and Mean Well® power supplies. Even after years the models normally still work very reliably.
For the price these models are an absolute bargain. We have been selling these models very successfully for years and rarely have any complaints about them.
These LED indoor spotlights with Philips® SMD quality LEDs are now very efficient and create a luminous flux that would have required even more power years ago. Depending on local conditions, we often recommend to use more models of the smaller and cheaper performance class to achieve a higher uniformity of illumination.
The LED indoor spotlight is equipped with Philips® SMD quality LEDs. This improves the cooling of the individual LEDs and has a positive effect on durability and service life. The used IP65 Mean Well power supplies are also absolute quality components for very high demands, which work long and very reliable. Power supplies very popular with connoisseurs.
The manufacturer grants 5 years warranty on this series of LED indoor spotlights. With a 120° beam angle, the hall spotlight is a wide-angle model that can illuminate a large field on the ground.
Areas of application of LED indoor spotlights with Philips® LEDs
Ideal application areas are industrial halls, workshops, warehouses with high ceilings and production plants such as metalworking. We usually recommend a short lighting plan for the hall to avoid glare effects and to achieve good and uniform illumination.
The hall spotlight is fastened to a ring eye and we recommend the use of chains for suspension according to DIN 5686 with corresponding weight approval.
A 150W hall spotlight usually replaces an old 300W HQL spotlight with 350 Watt system power (incl. power supply unit) without any problems. Many customers are usually very enthusiastic about the newly gained brightness and above all light quality. We offer the hall spotlight in a cool 855 colour (5500 Kelvin daylight white) or in an 840 colour with 4000Kelvin neutral white. The cool daylight white is not bluish or greenish as with many cheap indoor spotlights but clear and white. The 840 4000K has a slightly higher yellow and red component and therefore appears somewhat warmer in the light. Ultimately, it always depends on the industry which light colour is preferred and fits ideally.
The hall spotlight LED is not available as hall spotlight LED warm white in 3000K Kelvin. Alternatively we offer the following model
Due to the IP65 protection class, the hall spotlight can also be used without any problems in humid and dusty environments. By the use of many individual SMD LED chips the interior can be cooled better and the heat can be dissipated very much. This ensures that the brightness of the LED indoor spotlight remains the same for a long time. In terms of performance, the models are not fully utilised and are energised to the maximum. This prolongs the hatability as well as the longer preservation of the brightness.
LED hall spotlight dimmable
The models are basically not dimmable. Dimming in halls is usually somewhat more complex to realise. The following model is an inexpensive alternative to dimming in three different performance classes and is also inexpensive and very reliable. You can find the dimmable LED indoor spotlight here
Advantages LED indoor spotlights with Philips® LEDs and Mean Well® power supplies
- Uses only branded components such as Philips LED chips and Mean Well power supplies.
- Beautifully bright: With a power consumption of just 100 watts, the spotlight generates 13,000 lumens or up to over 30000 lumens of luminous flux.
- Full IP65 protection class
- Long 5-year manufacturer's warranty
- Realistic use from a ceiling height of 4 to 15 meters height
- Use of individual SMD LED chips for better cooling of the individual chips. Not fully energized for longer holding width.
Technical data Variations of LED workshop light in 5500K
Voltage 200-240V / 50 Hz | Light colour: 5500 K +/- 150 K (daylight) or 4000K +/- 150 K (neutral white) | Beam angle: 120° | LED type: Philips SMD 3030 | cos phi > 0,9 | | Operating temperature: -20°C to +50 °C | Power supply: Mean Well | | Mounting: Ring eyelet | | CE certificate and EMC test | RoHS certificate | 3-year warranty | non-dimmable | Efficiency: > 90% | colour rendering CRI >80 | | IP 65 Degree of protection | 30,000 hours Service life (Manufacturer information | Material: Die-cast aluminium Housing and lenses made of polycarbonate
| Luminous flux: 200Watt approx. 27.500 Lumen up to 28000 Lumen at 4000K-5500K | Lm -> 135Lm/Watt | Driver Meanwell constant current 4.1 A | Dimensions: F350*H131MM | Weight: 3.5 kg
Do you have special questions about our LED hall spotlights and LED warehouse lighting the application area? As technical energy manager TÜV Süd, efficiency is our business. We will be happy to advise you! Preferably in person! You can reach us under the telephone number: 0221-29821660 during our business hours or mobile. You can also contact us by e-mail or fax. We are also happy to call you back.
|Product category:||LED high bay fixtures|
|color temperature:||5500 Kelvin|
|luminous flux:||28.000 Lumen|
|material:||aluminum die-cast frame|
|beam angle:||120° degree|
|power consumpt.:||200 Watt|
|colour rendering (CRI):||RA >80|
|SMD-LED type:||SMD 3030|
|efficiency in lm/W:||110 lm/watt light output|
|power factor (cos phi):||> 0,9|
|average life cycle:||minimum 30.000 hours|
|energy efficiency class:||A++|
|time to reach full lumination:||directly|
|consumption per 1000 hrs:||200 kWh|
|Operat. temperature:||-25°C to 50°C|
|tests / audits:||CE, EMC/EMV, Rohs|
|warranty:||standard legal regulations apply|
|Additional information::||3 years manufacturer warranty|
|No flicker / flicker free:||Yes|
|Product weight:||4,00 Kg|