LED panel with top CRI97 colour rendering for excellent light quality. The LED panel 120x30cm with CRI97 colour rendering in 3500 Kelvin combines 2 worlds of light into one top product. This relatively new and rarely found light colour of 3500 Kelvin combines two previously separate areas. The warm cosy colour of 3000 Kelvin with a high feel-good factor and the familiar cosiness of home. In combination with the classic 4000 Kelvin work light, a pleasant work light is produced that creates a very cosy working atmosphere.
Very suitable for all areas where good colour rendering is required, for example when working with colours, fabrics, product design in advertising agencies as well as in retail when selling high-quality products and food or in hairdresser's shops. The high CRI value of >90 makes the objects appear realistic and undistorted and enables a significantly improved colour representation compared to standard LED panels.
The RA97 LED panel manages to combine the usual cosiness with a pleasant working light without quickly causing fatigue. The result is a 3500 Kelvin colour tone. Let us convince you.
The LED Panel CRI 90 is not dimmable as standard. However, it is adjustable and flicker-free. It can be slightly adjusted in brightness by small DIP switches on the power supply unit. To do this, select the option Non-dimmable - Adjustable power supply unit.
The RA97 LED panel 120x30cm can also be dimmed via a DALI2 bus. The model supports the new and improved DALI2 standard, which is also downward compatible with DALI 1. . In addition, the model can also be dimmed via a DALI push dimmer without its own DALI bus / gateway. Alternatively, this dimming also supports 0-10V analogue dimming. Please note that for DALI2 dimming you always need a 2-wire dimming line / control line for the command signals. So at least 5 wires between dimmer and luminaire power supply. Can also be used as an option for PUSH dimming via PUSH dim push-buttons.
This type of dimming comes closest to classic dimming via the power line. It is only necessary to ensure that dimming is done with compatible LED-capable dimmers or push-buttons. Then a clean dimming experience can be created. Without flickering or jumps in the dimming process. Mixed operation with other LED luminaires is also not recommended. A maximum of 3-4 LED panels can usually be operated on one dimmer without any problems. Select the phase dimming option for this type of dimming.
Thanks to its structured, microprismatic surface, the LED Panel CRI97 is largely glare-free and ideal for use in office workplaces (UGR19) or in rooms with low ceilings. The standard power supply units and DALI2 power supply units are absolutely flicker-free. Even across the dimming range. The excellent colour rendering ensures a very nice quality of light in continuous use and a very high feel-good factor. The model is also suitable for VDU workstations (BAP) UGR>19. The high and strict requirements for uniform, wide-area illumination with low glare are met. We can provide lighting data for the lighting calculation.
The standard power supply units are ENEC certified and thus guarantee very high electrical safety.
We offer the RA97 LED panel in 2 different versions. Also available in the size 60x60cm as a recessed luminaire or ceiling luminaire. See the following page.
- Top colour rendering of Ra97 /CRI97 for highest demands - Efficient model with 3800 lumen luminous flux at only 34W power consumption - Super pleasant and trendy 3500 Kelvin light colour - 5-year manufacturer's warranty 50,000 hours lifetime - High ergonomics and best light quality - Various dimming options available (DALI2- 0-10V dimmable - phase cut-off dimming)
Translated with www.DeepL.com/Translator (free version)
Power supply: 230V / 50/60 Hz (220V-250V) | Swivel:No | 110° beam angle | Colour temperature: 3500 KELVIN | Luminous flux: 3800 lumen n | Power: 34Watt |Life expectancy: at least 50. 000 hours | Colour rendering index: CRI97 - RA: 97 | Operating temperature: 10°C to 45°C | Dimmable: Yes (depending on dimming option selected) | Power consumption 1000 hours: 34 kWh | Energy efficiency: A+ | Standard power supplies are flicker-free | Housing material: Aluminium and PMMA | IP protection class: IP20
LED panels are usually mounted directly on the ceiling. A mounting frame for LED panels is often used for this purpose. Alternatively, solutions for suspension from the ceiling via wire suspensions are also offered. The third option is to place the panel on existing hole cut-outs. For example, in grid ceilings or cassette ceilings.
- Wire suspension with 4 wires or with Y-ropes - Ceiling mounting frame 120 x30 This turns your LED panel into a fully-fledged CRI97 LED ceiling luminaire.
Do you have questions about our LED panels or the delivery time of special versions? As a technical energy manager with a certificate from TÜV Süd,Akademie, efficiency is our business. We are happy to advise you! Preferably in person! You can reach us at the telephone number: 0221-9924573 during our business hours or by mobile phone. You can also contact us by e-mail or fax. We will also be happy to call you back.
