The 150x30 LED panel provides up to 4800 lumen luminous flux (4000K) with 40W power consumption. The panel measures 149.5 x 29.5 cm and is specially equipped with a glare-reducing surface. The power supply units are flicker-free for trouble-free working. Thanks to the glare-free surface with UGR<19, this LED panel is ideally suited for office work at a computer workplace in accordance with workplace guidelines.
We offer the glare-free LED panel 150x30cm UGR<19 in the light colour 4000K (840). A flicker-free Philips® CertaDrive brand power supply unit is included as standard.
The LED panel produces a very attractive, homogeneous, evenly distributed light with no major glare effects. A low power consumption of just under 40 watts makes it an efficient light source and generates a luminous flux of up to 4800 lumens. The surface is made of non-yellowing PMMA plastic.
- General lighting in corridors or shops - Office and workplaces - LED panels in conference rooms - in doctors' surgeries or waiting rooms - Replacement for 2 x58 watt louvre luminaires
The large surface area generates a lot of light without causing too much glare. Nevertheless, dimming may be an option in some circumstances to dim the output slightly when there is a lot of daylight. As accessories, we supply dimmable power supply units with DALI dimming, 1-10 volt dimming (via separate dimming cable) or alternatively dimming via phase angle/section dimming.
1st Dali 2 dimmable power supply unit for use in the DALI BUS. Requires a 2-wire dimming cable
Light colour 840: 4000 Kelvin ( neutral white) | Power consumption: 40 watts | Frame colour: white | Dimensions: 1495mm x 295mm x H: 11mm (45mm with LED power supply unit) | Manufacturer's guarantee: 5 years | Luminous flux: 4800 lumens (at 4000K neutral white) | Power supply: 200V to 240V | Luminous efficacy Lm/W: 120 lm/W | COS-phi: >0.9 | Colour rendering RA 85 | Beam angle: 120° | IP 41 | Frame: Aluminium Dimmable: No - dimmable power supply unit available | Specified service life (manufacturer's specification): 50,000 hours | Operating temperature: -20 ~45'C | Humidity in use: 10-70% | | Long-term stable and non-yellowing PMMA light guide plate | Power: 40 watts
There are many different mounting options for the LED panel.
Ceiling mounting frame
We can also offer a simple, pluggable and functional surface-mounted frame for ceiling installation as a 1500 x 300mm LED ceiling light.
Plasterboard ceilings:
The panel can be clipped into a plasterboard ceiling using spring clips (article: FK_GK4), which are mounted on the back. This provides an almost flat surface. However, a cut-out must be made in the plasterboard ceiling for this!
Rope suspensions:
The panel can also be easily suspended from the ceiling using cable suspensions. We recommend 3 Y-rope suspensions.
Advice:
Do you have any questions about our LED panels? As a technical energy manager TÜV Süd, efficiency is our business. We are happy to advise you! Preferably in person! You can reach us on the telephone number: +49221-29821660 during our business hours or by mobile phone. You can also contact us by e-mail form or fax enquiry. We will also be happy to call you back.
