Very efficient LED panel 62x62 with very good workmanship and bright luminous flux of 4350 lumens with only 36W power consumption. The power supply and the panel are TÜV / GS certified for tested safety. The very flat and only 11 mm high LED Panel 62x62 panel is available in the light colours 4000K (neutral white) and a pleasant 5000K (daylight white) which provides a cool light without drifting into the blue. Ideal for medical practices and quality control.
The 4000K neutral white version is close to the 4000K colour tone. A bright clear, bright light without appearing too cool. An ideal model for use in offices, schools, conference rooms, doctors' surgeries or in shops.
The model is extremely economical in power consumption and produces a bright 4300 lumen luminous flux at only 36W power consumption. This corresponds to a real efficiency of 120 lumen / watt and is a panel of the newer generation. The LED panels have been photometric measured and a light calculation file is available on request. No humming or acoustic noise is generated. The full brightness is reached directly after switching on. The saving in the replacement of 4x18W fluorescent tubes is approx. 55% energy saving.
Replacing a louvre luminaire with a built-in luminaire is quick and easy. The louvre light is removed and the LED panel can be inserted into the existing cutout. The LED driver is placed directly on the panel. The installation takes about 10-15 minutes. At the workplace, the variant in the light colour neutral white is most commonly used. The light is considered stimulating and activating by the employee (LED panel 62x62 neutral white -4000K)
The workmanship of this model is of high quality and leaves a consistently good impression. The frame is white and smooth without any frills. The back of the panel is made of metal and the installation is done within a few minutes. The LED panel 62x62 panel is supplied via 1 power supply unit. Dimmable power supplies can also be supplied as accessories (please ask for details),
The model comes with a 3 year standard manufacturer's warranty and can be offered with a 5 year manufacturer's warranty for a small surcharge.
Flicker-free, homogeneous light distribution and extremely economical
The LED panel is flicker-free / flicker-free and has no disturbing stroboscopic effects, which often occur with cheap LED power supplies and to which some people react sensitively.
White smooth aluminium frame without frillsDimensions:620*620 mm x only 9mm highHeight with power supply: approx. 4cm Power supply: 230V / 50/60 Hz 180V-260V) 36Volt DC 36W Power consumption 120° beam angle Color temperature: 4000K = 4300 Lumen -> 119,5Lm/Watt5000K daylight white= 4350 Lumen 120LM/WattFor indoor use only (IP20)Specified service life (manufacturer's specification):50,000 hours LED chip manufacturer: EPISTAR LM-80 and TM-21 tested
Colour rendering index: RA: >80
Operating temperature: -20°C to 45°C
Certificates: TÜV/GS certified power supply + LED panel, CE, Rohs, EMC,
36 months manufacturer's warranty / Extendable to 5 years
Power consumption 1000 hours: 36kWh
Accessories: Ceiling mounting frame for ceiling mounting or cable suspension
Do you have any questions about our LED Panel 62x62 for coffered ceilings and Odenwald ceilings or the direct ceiling installation? As technical energy manager TÜV Süd, efficiency is our business. We are happy to advise you! Preferably personally! You can reach us under the telephone number: 0221-29821660 during our business hours or by mobile phone. You can also contact us via e-mail form or fax inquiry. We will also call you back.
LED panels offer a large number of benefits. One advantage of the LED panels are the very good energy efficiency figures and low power consumption. LED panels produce a light output that causes fewer glares and an even light compared with other lamps. Thus LED panels are well suited to be used in offices with computer screen workspaces. LED panels produce no flicker and UV light. So it does not lead to fading of products or goods.
The areas of application of LED panels are very diverse. Due to the large-scale and unobtrusive light distribution of LED panels are often used in offices, canteens or in the entrance area of the company.In commercial premises or shop areas LED panels are often installed as a replacement for louvre luminaires and recessed ceiling luminaire .Also in conference rooms, waiting areas , canteens and lounges, LED panels can be found.For health and care in hospitals , medical offices, or in nursing homes, we supply special LED panels , that can eliminate the bacteria , viruses and unpleasant odors . These can be found on the following page .H3 : Mounting LED panelsh4 installed in coffered ceilings / Odenwald ceilingLED panels can be used as a direct and energy-efficient replacement for the 625 coffered ceilings (Odenwald ceilings) with 625 x 625 mm standard measure in direct exchange. These are simply inserted as a recessed luminaire in the raster section of the ceiling grid light. It allows to replace a 4x18 watt grid light to replace it with a 45 watt LED panel. In addition, many LED panels can be dimmed and also controlled flexibly in combination with an ambient light sensor.
LED panels can be used as a direct and energy-efficient replacement for the 625 coffered ceilings (Odenwald ceilings) with 625 x 625 mm standard measure in direct exchange. These are simply inserted as a recessed luminaire in the raster section of the ceiling grid light. It allows to replace a 4x18 watt grid light to replace it with a 45 watt LED panel. In addition, many LED panels can be dimmed and also controlled flexibly in combination with an ambient light sensor.
LED panels can be easily mounted on the wall. Horizontally or vertically! Depending on the size. Great light effects for products or waiting areas can be achieved.
The lightweight LED panels can be mounted on ceilings and hanging on wires. Alternatively, there is the possibility of the panel with a mounting frame as mounted luminaire to be mounted on the ceiling.
LED Panels are available as direct radiating panel lamp or alternatively as a side emitting LED panels. Here, the LEDs are mounted on the side of the panel and redirect the light with a specific light guide plate to the ground. The advantage of this edge-lit panel is the very low height of just under 1 cm (without power supply). The direct panels are slightly higher in design, achieved through the direct radiation mostly but also a better luminous efficacy in lumens / watt.
- LED panels are extremely energy efficient and have a very good luminous efficacy in lumens per watt.- Long life: LED panels have a very long life if quality manufacturer are chosen. They provide expertise in thermal management and high demands on the power supply used.- Large-area and uniform emission and light distribution with fewer glares- LED Panels can be used as mounting or mounted luminaries depending on the manufacturer .- No IR radiation of UV light or unfavorable- No flickering or flickering light- LED Panels can be dimmed and are used in conjunction with a lighting control system as a controllable element for daylight utilization.- Available in all standard colors of light- The low heat emission between 30 and 45 degrees allow a wide range of applications. LED panels do not need additional cooling.
- Many areas of application, easy assembly , save power comfortably.
You have questions about our Ultraslim LED Panels? for professional use? We will help you! Preferably personally ! Please contact us at the phone number : 0049-221-9924573 during normal office hours or mobile . You can contact us by e -mail or fax request. We also call you back.
