Very efficient Led panel 60x120 DALI dimmable in 4000 Kelvin neutral white with reduced glare of UGR<19 thanks to microprismatic surface. With 120 lumens/watt at only 60W power consumption, the panel reaches up to 7000 lumens of luminous flux without being garish. An ideal LED panel 120x60cm for the office workplace. With the optional ceiling mounting frame, the panel becomes a complete large area LED office light 120x60cm with low glare. All with plenty of brightness and no flicker in the light. The power supply and the panel are TÜV / GS certified for tested safety.
The very flat only 10 mm high Led Panel 60x120 with a size of 119.5 x 59.5 cm we offer in the common office light color 4000K neutral white (840) (neutral white). The models are very reliable even in continuous use. It can be quickly expanded into a cost-effective powerful LED office light 120x60cm.
On request, the Led Panel 60x120cm can also be supplied with dimmable power supplies. Due to the large area, a lot of light is generated without being particularly dazzling. Nevertheless, for large window fronts, dimming may be a good idea to reduce the power a bit when daylight comes in during the brighter seasons.
We can be supplied dimmable power supplies approximately as Led Panel 60x120 DALI or Led Panel 60x120 with phase cut-off dimming or with 1-10Volt dimming (via separate dimming line as also with the DALI variant)
1. the Led Panel 60x120 DALI with UGR<19 for screen workstations is very often integrated into large building automations via DALI or KNX. This allows models to be controlled and regulated individually. The advantage of DALI dimming is that the light remains flicker-free and does not produce flicker. Also, lower dimming levels can be achieved than with phase dimming.
quickly and inexpensively installed. The Flicke in the light is with the phase dimming but somewhat higher. 3. dimming by remote control or with a suitable wireless wall switch. On the subject of dimming, we will be happy to advise you on 0221-29821660.
The Led Panel 60x120 BAP for screen workstations is set in a white aluminum frame and is very often used in commercial spaces, offices, schools and classrooms, stores, retail or reception areas. Also in treatment rooms and examination rooms of doctors this ceiling light can be used very well. Patients are hardly dazzled and there is enough brightness for examination.
It produces a very nice homogeneous, evenly distributed light, which does not have large glare effects. In this way, it is possible to create daylight effects over a large area in a room or to simulate the incidence of light through skylights. (Dimming via phase dimming has a slightly higher flicker factor in the light, due to the cutting of the phase).
LED panels do not produce flickering or flicker. No UV light is released and they do not emit unwanted UV light in the process. So it does not lead to fading of products or goods. Due to its optimized thermal management, it achieves a lifetime of 50,000 hours.
Technical data: White aluminum frame / outer edge | Dimensions: 1200*600 mm x only 9mm high / Height with power supply: about 4cm | Power supply:230V / 50/60 Hz 180V-260V) DC: 1400mA | 60W power consumption, DALI dimmable |110° beam angle | suitable for screen orbits: YES glare factor UGR<19 | color temperature: 4000K neutral white = 6900 lumens |Applied lifetime (manufacturer's specification): 50,000 hours | Color rendering index: RA: >80 | Application temperature: -20°C to 45°C |Certificates: TÜV/GS certified power supply + LED panel, CE, Rohs, EMC | For indoor use only (IP41) |48 months manufacturer's warranty | Power consumption 1000 hours: 60 kWh
The scope of delivery of this Ultraslim LED Panel includes the LED panel and 1 piece LED driver (power supply) in the price.
Led Panel 60x120 Mounting Options:
There are many different mounting options for the LED panel.
The panel can be clipped into a gypsum board ceiling with the help of spring clips (item: FK_GK4), which are mounted on the back side. This gives an almost flat surface. But a cut-out must be cut into the plasterboard ceiling for this!
For concrete ceilings, the use as a simple LED ceiling mounted light with the help of a mounting frame. The frame is screwed to the ceiling, the LED panel is inserted and the power supply unit is accommodated in the frame. You can find the suitable frame here:
Do you have questions about our large LED ceiling lights or our super flat LED panels? As technical energy manager TÜV Süd, efficiency is our business. We are happy to advise you! Preferably in person! You can reach us under the telephone number: 0221-29821660 during our business hours or mobile. You can also contact us by e-mail form or fax request. We are also happy to call you back.
Translated with www.DeepL.com/Translator (free version)
light calculation file .ies of the Led Panel 60x120 UGR19
