The LED panel 150x30 delivers 3800 lumen luminous flux (4000K) at 45W power consumption. The panel measures 149.5x29.5cm and is specially equipped with a glare-free surface.
We supply the LED panel in the light colours 3000K warm white or alternatively 4500K neutral white. On request we can also supply a 5500K daylight white.
General lighting in aisles or shops LED panel in conference rooms in doctor's surgeries or waiting rooms Residential rooms
The large surface area produces a lot of light without the need for large apertures. However, dimming may still be useful in order to dim the output somewhat in daylight. As an accessory, we supply dimmable power supplies with 1-10Volt dimming (via separate dimming line) or alternatively dimming via phase cutting/segment dimming.
2. dimming via phase-angle dimming / cut-off dimming. The dimming mode is very similar to the classic dimming of incandescent lamps via the power line. We offer suitable power supplies for this purpose, which show a very good dimming curve, without jumps in the dimming and with low noise emission. A prerequisite, however, is an LED-capable wall dimmer that can dim LED luminaires.
Bright light and homogeneous light distribution and extremely economical
The LED panel produces a very nice homogeneous, evenly distributed light which does not show any great glare effects. A low power consumption of just under 45 Watts makes it an efficient light source and produces a luminous flux of 3800 lumens (equivalent to more than 2 E27 bulbs in clear).
Dimensions:Length: 1495mm / Height 9mm / Width: 295mm
Power supply: 230V / 50/60 Hz (220V-240V) 45W Power consumption120° beam angle Dimmable: Yes TRIAC Dimming
Color temperature: 3000K warml white Luminous flux: 3000K= 3600 Lumen Protection classes:IP20
Specified service life:40,000 hours 3-year manufacturer's warranty Color rendering index: RA: >80 Operating temperature: -20°C to 45°CHumidity:10-80% Certificates: CE, Rohs, EMC
36 months manufacturer's warranty Power consumption 1000 hours: 45kWh
There are many different mounting options for the LED panel.
Plasterboard ceilings:
The panel can be clipped into a cardboard box cover by means of spring clips (article: FK_GK4) which are mounted on the back side. This gives an almost flat, flat surface. But a cutout has to be cut into the plasterboard ceiling!
Rope suspensions:
The panel can also be suspended from the ceiling on cable suspensions. We recommend 3 pieces of Y- rope suspensions.
Insert luminaire grid ceilings:
The panel can be inserted into grid ceilings as an inlay light.
Do you have any questions about our LED panel? As technical energy manager TÜV Süd, efficiency is our business. We will be happy to advise you! Preferably personally! You can reach us under the telephone number: 0221-29821660 during our business hours or by mobile phone. You can also contact us via e-mail form or fax inquiry. We will also gladly call you back.
LED panels offer a large number of benefits. One advantage of the LED panels are the very good energy efficiency figures and low power consumption. LED panels produce a light output that causes fewer glares and an even light compared with other lamps. Thus LED panels are well suited to be used in offices with computer screen workspaces. LED panels produce no flicker and UV light. So it does not lead to fading of products or goods.
The areas of application of LED panels are very diverse. Due to the large-scale and unobtrusive light distribution of LED panels are often used in offices, canteens or in the entrance area of the company.In commercial premises or shop areas LED panels are often installed as a replacement for louvre luminaires and recessed ceiling luminaire .Also in conference rooms, waiting areas , canteens and lounges, LED panels can be found.For health and care in hospitals , medical offices, or in nursing homes, we supply special LED panels , that can eliminate the bacteria , viruses and unpleasant odors . These can be found on the following page .H3 : Mounting LED panelsh4 installed in coffered ceilings / Odenwald ceilingLED panels can be used as a direct and energy-efficient replacement for the 625 coffered ceilings (Odenwald ceilings) with 625 x 625 mm standard measure in direct exchange. These are simply inserted as a recessed luminaire in the raster section of the ceiling grid light. It allows to replace a 4x18 watt grid light to replace it with a 45 watt LED panel. In addition, many LED panels can be dimmed and also controlled flexibly in combination with an ambient light sensor.
LED panels can be used as a direct and energy-efficient replacement for the 625 coffered ceilings (Odenwald ceilings) with 625 x 625 mm standard measure in direct exchange. These are simply inserted as a recessed luminaire in the raster section of the ceiling grid light. It allows to replace a 4x18 watt grid light to replace it with a 45 watt LED panel. In addition, many LED panels can be dimmed and also controlled flexibly in combination with an ambient light sensor.
LED panels can be easily mounted on the wall. Horizontally or vertically! Depending on the size. Great light effects for products or waiting areas can be achieved.
The lightweight LED panels can be mounted on ceilings and hanging on wires. Alternatively, there is the possibility of the panel with a mounting frame as mounted luminaire to be mounted on the ceiling.
LED Panels are available as direct radiating panel lamp or alternatively as a side emitting LED panels. Here, the LEDs are mounted on the side of the panel and redirect the light with a specific light guide plate to the ground. The advantage of this edge-lit panel is the very low height of just under 1 cm (without power supply). The direct panels are slightly higher in design, achieved through the direct radiation mostly but also a better luminous efficacy in lumens / watt.
- LED panels are extremely energy efficient and have a very good luminous efficacy in lumens per watt.- Long life: LED panels have a very long life if quality manufacturer are chosen. They provide expertise in thermal management and high demands on the power supply used.- Large-area and uniform emission and light distribution with fewer glares- LED Panels can be used as mounting or mounted luminaries depending on the manufacturer .- No IR radiation of UV light or unfavorable- No flickering or flickering light- LED Panels can be dimmed and are used in conjunction with a lighting control system as a controllable element for daylight utilization.- Available in all standard colors of light- The low heat emission between 30 and 45 degrees allow a wide range of applications. LED panels do not need additional cooling.
- Many areas of application, easy assembly , save power comfortably.
You have questions about our Ultraslim LED Panels? for professional use? We will help you! Preferably personally ! Please contact us at the phone number : 0049-221-9924573 during normal office hours or mobile . You can contact us by e -mail or fax request. We also call you back.
