LED tube 1500mm T8 22W 6000K clear

SKU: YM-T8_150_22W_60C
Category: LED tubes

This LED tube 1500mm T8 for professional usage with 22 watts power consumption is one of our best selling LED tubes.This 18W LED tube 150cm can be offer with the following light colours 4500 Kelvin (neutral white) and 6000 Kelvin (daylight white) in OEM quality. This 150cm T8 LED tube is equipped with 396 individual SMD LEDs.

Cover: clear
frosted
Colour temperature: 4500K neutral white Unfortunately, your selection is not available.
6000K daylight white

29,29 €

excl. 19% VAT , plus (Sperrgut-Paket)

Please note our minimum order value of EUR 30.

From	Unit price / piece
10	32,02 €*
20	30,47 €*

Low stock level
Availability: on request

piece

This LED tube 1500mm T8 for professional usage with 22 watts power consumption is one of our best selling LED tubes. We deliver this T8 led tube 150cm version with up to 2800 lumen and 126 lm/watt light output in industrial OEM quality.This LED tube replaces a conventional 58 watt fluorescent tube. The 150cm (5ft) light fixtures are the most widespread versions in the commercial and industrial sector.

Well suited for daily and continuous use in offices, workshops, reatil shops, garages, storage rooms and industry. This 18W LED tube 150cm can be offer with the following light colours 4500 Kelvin (neutral white) and 6000 Kelvin (daylight white) in OEM quality. This 150cm T8 LED tube is equipped with 396 individual SMD LEDs.

The T8 LED tube 150cm with G13 socket is designed to meet high professional quality demands for long-term stability and luminosity from professional users.

benefits of this T8 LED tube 150cm

long lifetime:

The lifetime of this 150cm T8 LED tube is 30,000 hours. The manufacturer promises a constant luminous flux of at least 20,000 hours. This corresponds to a lifetime of 12 years at 250 working days and 10 hours operating time. Or 3.5 years of continuous operation.

start current limiter:

The starting current limiter ensures a soft start and a limiting of the peak load.

rotatable end caps:

The end covers can be turned by 180 degrees to ensure an optimized orientation of the light source to the object. This offers more flexibility when the tube is installed in a lamp that is mounted on the ceiling. Louvre luminaires. In underground car parks the light source can be focused on the parking area.

optimized thermal management:

High temperatures provide a shorter survival time for the individual LEDs. The integrated heatsink ensures a constant temperature of max. 45 ° C. This guarantees a long product life and stability in the luminosity.

Compatible LED ready batten-fittings:

For this T8 LED tube 150cm we can offer LED-ready batten-fittings als standard LED light fixtures or moisture-proof batten-fittings.

Shipping from Germany:

We ship from Germany throughout Europe.

Technical consulting and contact:

We can offer technical support and consultation. Feel free to get in contact through telephone 0049-221-9924573 during our business hours. You can also send us an e-mail through our contact form or get in contact through fax.

Radiation data:

Can be downloaded in the download section

Benefits:

Can be found in the tab: benefits of LED tubes in office and industry

Product category:	LED-T8 tubes
color temperature:	6000 Kelvin
body:	clear
luminous flux:	2800 lumen
length:	150cm (1498mm)
replaces illuminant:	58W fluorescent tube
socket:	G13 -T8 socket
beam angle:	120° degree
socket fitting:	Ja: 180° -Ausrichtung möglich
dimmable:	no
power consumpt.:	22 watt
colour rendering (CRI):	cri: 82
efficiency in lm/W:	126 lm/watt
number of switching cycles:	> 50.000
Application:	professional use
average life cycle:	minimum 30.000 hours
Operating hours w. stable lum. flux:	min. 20.000 operating hours
energy efficiency class:	A
UV. or infrared emission:	No
diameter:	26mm
weight:	442 grams
power input:	Single sided
IP-Class:	IP 30
Power supply:	230V / 50 Hz (from 100V up to240V)
Additional information::	Limited usage outside of buildings

Can you really save electricity costs, buying a 40 Euro LED-tube compared to a 3 Euro fluorescent tube?

Yes! Especially in companies with long operating times of the lamps.It does not matter whether it is a company with 2 -or 500 employees. Efficiency criteria of T8 or T5 LED tubes are the daily operating-time (uptime or opening hours in retail), the much longer life of LED tubes but also the lower maintenance expense.

Power saving LED tube: 50% or more are possible.

The four standard sizes of fluorescent tubes roughly achieve the following savings:

length	power consumption LED-tube	consumption LED-tube	savings	often used in
60cm	18Watt / unit*	9 watts	around 50%	louvre luminaires
90cm	30 watts/unit*	15 watts	around 50%	furniture and cabinets
120cm	36 watts/unit*	18-19watts	around 50%	office, shop, retail, commercial
150cm	58 watts/unit *	22-23 watts	around 60%	industry and commercial environment.

*The classic fluorescent lamp is always operated in conjunction with a ballast (SG **, ** ECG, CCG **). This consumes additional power and that can account for up to 15 watts per bulb. In the simple replacement of fluorescent lamp with SG against a LED tube, the ballast will continue to operate. It may be more economical to replace the entire lamp.

A personal and professional calculation is necessary. Also helpful is the demonstration of possible alternatives. Please get in contact...

** CCG = Conventional ballast (choke), SG = low loss ballast, Electronic ballast (ECG)

Picture shows result after replacement of 58W fluorescent tubes against 25W LED bulbs. 50% energy saving and a better, high contrast light quality

Life with 24-hour continuous use: 3-4 years

A normal fluorescent lamp has an average life time of about 10,000-12,000 hours. LED tubes are usually indicated with 50,000 hours or more.This is also true for the individual LEDs installed. Realistically, is an average life between 30,000-40,000 hours.This is due to the built-in electronic components (capacitors / triacs) that are subject to a quicker wear.

With very cheap LED tubes downtimes after 2-3 months can often be observed. Get advise from a competent contact person, before you purchase.

Amortization: Between 1.5-3 years is normal.

In the commercial sector with weekly working hours from 40 hours to 24-hour shift system can be quite short payback periods of 1-3 years to achieve and achieve an attractive return on the investment thereafter.

In many cases, the power savings is higher than the monthly burden of financing the conversion.

image shows replacement of 58W fluorescent tube against 25W LED tubes. Lower power consumption and better light with higher contrasts.

It can be assumed that the price of electricity continues to rise in the future and the calculation thus continued to develop positively. An accurate inventory of existing lighting is important. This is associated with some effort, but it pays to be very working basis.

Individual payback calculation for your LED project.

We create amortization calculations for LED projects for our customers based on their current situation, operating times and electricity prices

Please contact us and judge us according to your individual requirements. You can reach us at 0049-221-9924573 or via our contact form

LED tubes are high-priced: We wait with the purchase!

Without a doubt, rethinking is required! The change of the fluorescent tube as a pure consumables towards greater investment must be explained to the companies. Even with declining LED prices and better products, it is not worth waiting. With the currently high electricity prices, great savings can be achieved, which can eventually pay for itself. An investment in the latest technology allows you to lift a high savings now.

Are the LED tubes amortized and have achieved a significant return, you can you still invest in the next-generation of LEDs.

No delay and switching stability: Fast light without flickering

Compared to the classical fluorescent tube LED Tube will start immediately. Without delay and flicker. Flickering neon lights interfere with the visual perception and have a direct negative impact on the quality of work.Through the direct start, it is also possible to operate the LED tubes directly on a motion detector, because the light is available immediately at full intensity. In addition, LED tubes are insensitive to frequent switching on and off. Even the familiar humming and disturbing noise does not occur with LED tubes.

Without UV light / IR component: Protects goods and goods in the salesroom

LED tubes as a replacement for fluorescent lamps produce no ultraviolet light component. This means that goods, clothing or food do not fade in the retail or age faster. In addition, fewer insects are attracted by LED tubes.

Lower maintenance costs

Through the use of LED tubes also reduce maintenance costs, quite worthy to be in larger companies.The frequent exchange of individual tubes or starters omitted. This includes the robustness of the LED tubes. Compared to the fluorescent housing are better protected against shocks or vibration and not break so easily. Advantages and quality criteria for selecting LED-tubes: Get a competent advice. Cologne Energy LED technolog from Cologne

No toxic substances: No bad conscience

Compared to fluorescent LED tubes are not filled with polluting gases to be expensively disposed over the hazardous waste. LED tubes are simply disposed of as electronic waste.

Performance-based electricity bill: base load reduction, power factor and reactive power

For companies with high power consumption is usually not charged per kilowatt-hour special on a performance-based measure of utility. It is calculated with the retrieved peak load, which is calculated mostly from the mean of the two monthly peaks.

With a consistent transition to LED lower your base load permanently.

In companies with a high percentage of machines, the reactive current issue comes into play. The reactive current is compared to the active current provided by the electricity company but can not be used. But it must be paid for it if the factor cos phi is <0.9.

This will be listed separately on the electricity bill. Good LED bulbs have a power factor> 0.95 and are not covered.Traditional fluorescent tubes with CCG have a power factor of 0.3-0.4 and usually have to be compensated by additional capacitors. Large savings and better light. Save 50% and more electricity costs, replacing fluorescent tubes against LED-Tubes

Especially in large commercial machines the theme parks reactive current is an important issue to massively save on electricity costs. Which LEDs are right for my business and what must be considered when upgrading? Please contact us and judge us according to your individual requirements. You can reach us at 0049-221-9924573 or via our contact form

Links:

Wikipedia reactive current