100W DALI high bay luminaire according to the latest DALI 2 standard. Enables control, regulation and dimming of individual high-bay luminaires or defined groups of luminaires via the DALI BUS. Defective luminaires are indicated in the DALI network and the DALI high-bay luminaires can be switched on and off via DALI in the same way.
100W DALI high bay luminaire according to the latest DALI 2 standard. Enables control, regulation and dimming of individual high-bay luminaires or defined groups of luminaires via the DALI BUS. Defective luminaires are indicated in the DALI network and the DALI high-bay luminaires can be switched on and off via DALI in the same way. These 100W DALI high-bay luminaires are inexpensive, bright and reliable. The current 4th generation of these 100W LED DALI high-bay luminaires with up to 15,000 lumen luminous flux is considered to be very reliable even in continuous use. The model is one of our absolute bestsellers and ensures a high level of electrical safety thanks to LED DALI drivers with ENEC certification.
Individual control via DALI allows individual hall spotlights to be set, for example, with reduced output in traffic routes or to reduce glare. This saves additional energy and also extends the service life of the luminaires.
We offer these efficient DALI high-bay luminaires as high-bay luminaires with 100W, 150W low-bay, 200W or 240W output. Combined with a very good price/performance ratio and a low failure rate of less than 1/1000 units. The price is extremely attractive for a current DALI 2 high-bay luminaire.
These LED high bay luminaires work with modern and reliable power supply units that are ENEC certified and offer a high level of electrical safety. The power supply units are protected against: Overheating, overvoltage, short-circuit safety and excessive current. The power supplies are long-term stable and reliable in continuous use. The built-in LEDs are only energised up to 80%. This leads to a longer durability in continuous use.
We also offer this model as a high-bay luminaire with ON-OFF power supply and 1-10V analogue dimming (via 2-wire dimming cable) or in combination with Casambi modules.
Glare reduction with UFO high bay luminaires - transparent reflector shades
UFO high-bay lighting has a wide beam angle of 120° as standard. With low mounting or very high output, this can lead to glare with the UFOs. As a measure to reduce glare on the UFOs, we offer transparent reflectors that direct the light downwards at a 75° angle while allowing the light to escape very diffusely to the side. As these reflectors are quite fragile when shipped, we only offer this combination as a complete VPE of the hall floodlights as a package. No individual shipment!
For the UFO high bay spotlights, we offer transparent reflector shades, analogue 1-10V daylight sensors, CASAMBI radio dimmers for Bluetooth control via app and smartphone, and also external surge protection modules.
Certificates: ENEC certified power supply unit, | Protection class: IP65 | Mounting: Ring eyelet and drop guard | Energy efficiency: A+ | Dimming: 1-10 volt dimmable or non-dimmable | Light colours: - Neutral white: 4000K (840) - 6000K Daylight white - 3000K Warm white (only on request) | Luminous flux: 15,000 lumens (3000K: 14,000 LM) | Dimensions: 250mm x 122mm | Input: 220-240V | CE, RoHs, EMC | Protection against overvoltage, short circuit, overheating,
Download light calculation file 100W LED high bay spotlight 15,000 lumen as .ies file
