Noble series of surface mounted ceiling luminaires with silver reflector are available in different dimmable versions. In addition to the dimmable power supplies of the series, you can choose from different interchangeable reflectors. For example in matt silver, black or gold. The dimmable surface-mounted ceiling luminaire uses high-quality SAMSUNG® LED chips and has an outer diameter of 200 mm and a mounting height of 173mm.
A selector switch on the top of the surface-mounted luminaire allows the light colour to be operated in 3000 Kelvin warm white | 4000 Kelvin neutral white or cool 5700 Kelvin daylight white. In this way, different areas in a building can be illuminated very quickly depending on the lighting requirements.
With 40 watts of power and high-quality SAMSUNG® LEDs, these dimmable surface-mounted ceiling luminaires generate up to 4000 lumens of luminous flux. This is particularly necessary in buildings with high ceilings to achieve good brightness. Lower outputs can easily be achieved by dimming or adjusting the power supply units.
Combined with a very good quality of light, these bright surface-mounted luminaires with silver reflector are a top LED ceiling luminaire. Good LED chips maintain the luminous flux and light colour for a long time and permanently. The recessed spotlight and the power supply unit are specified with a service life of 50,000 hours and have a 5-year manufacturer's guarantee. The models run absolutely smoothly and have very low failure rates even in continuous commercial use.
Optional interchangeable reflectors are available for quick and easy replacement. The standard reflector in silver high gloss is included in the price of the luminaire. As an option, the reflector can also be ordered in black, gold or matt silver.
This 8 inch / 200 mm LED surface mounted ceiling luminaire can be offered for different dimming modes.
The DALI power supply is according to the latest DALI 2 standard. This enables high compatibility with many existing DALI bus systems. The power supply unit is ENEC and TÜV/GS certified and thus guarantees a high level of electrical safety. The LED driver can be reset to a slightly lower brightness by means of DIP switches if the basic setting is too bright and no complex dimming is required. The DALI dimm surface-mounted ceiling luminaire is often integrated into large building or home automation systems via DALI or KNX. This allows models to be controlled, switched and dimmed individually.
The advantage of DALI dimming is that the light remains flicker-free and does not flicker. Lower dimming levels can also be achieved than with phase dimming.
The DALI 2 dimming protocol enables improved compatibility of DALI luminaires from different manufacturers with each other in a common DALI dimming network. The power supply unit is flicker-free and supports push dimming in addition to DALI dimming. Push dimming also runs via a dimming line and is ideal where it is not worth setting up a DALI network with a gateway because of the small number of luminaires.
This type of dimming is very similar to the classic dimming of incandescent lamps via the power line. We offer suitable power supply units for this, which have a very good dimming curve, no jumps in the dimming and low noise development. A prerequisite, however, is an LED-capable wall dimmer that can dim LED luminaires. In this way, flickering or jumps in the dimming curve can be avoided. This type of dimming for LEDs usually allows a minimum dimming of 10 to 15% of the total brightness. However, the number of luminaires that can be operated simultaneously on one dimmer is usually limited to about 5-6 luminaires.
Dimming is done with a rotary or touch dimmer. When used with a home automation system and dimming actuators, a dimming test is recommended in advance.
Analogue 1-10V dimming requires a thin control cable and a suitable 1-10Volt wall dimmer. Dimming is very clean and even without flickering or flickering in the light. The minimum dimming level is approx. 10%. In existing buildings, however, there is usually no 5-core cable for a dimming line! This often makes implementation in existing buildings difficult. The power supply unit can be reset with DIP switches to a slightly lower brightness if the basic setting is too bright and no complex dimming is to be realised.
Voltage 200-240V / 50 Hz | Power 40Watt | Light colour: 3000K warm white or 4000K neutral white or 5700 Kelvin daylight white selectable | Luminous flux: max 4000 lumen | Beam angle: 85° narrow beam | CD: 800 | Outer diameter: 203mm - 8 inch| Ceiling mounting height: 173mm | Glare value: UGR<19 | Protection class: IP 40 from underside of luminaire IP 20 | Protection class power supply unit of protection class II | cos phi > 0.95 | | Operating temperature: -20°C to +45 °C || Dimmable: Yes -Dimming mode dependent on selected power supply unit | 50. 000 hours service life (manufacturer's specification) | 5-year manufacturer's warranty | | Constant secondary current: 1000mA | Reflector silver high-gloss or optionally gold / black / silver frosted
This series of ceiling surface mounted luminaires in silver with noble high gloss reflectors is available in the following sizes.
6 inch - 154mm LED ceiling light DALI dimmable silver reflector with 15 watt output
8 inch - 203mm LED surface mounted luminaire silver ( 203mm outer dimension and 173mm height ) with 40 Watt output
10 inch -255mm ceiling luminaire with silver reflector (255mm outer dimension and 176mm height) with 40 watt output
12 inch - 281mm ceiling luminaire silver DALI dimmable (281mm outer dimension and 176mm height) with 40 Watt output
Sie haben spezielle Fragen zu unseren LED Deckenleuchten das Einsatzgebiet? Als technischer Energiemanager TÜV Süd, ist Effizienz unser Geschäft. Wir beraten Sie gerne! Am liebsten persönlich! Sie erreichen uns unter der Telefonnummer: 0221-29821660 zu unseren Geschäftszeiten oder auch Mobil. Sie können uns auch gerne per e-Mail Formular oder Faxanfrage kontaktieren. Wir rufen auch gerne zurück.
Download lightcalculation file 8 inch surface mounted ceiling luminaire LED 40W
