LED Downlight in Black dimmable in warm white for a hole size between 100mm and approx. 110mm ceiling cut-out. The dimmable black Downlights are becoming increasingly popular in the market. The black is a RAL 9017 colour.
LED Downlight in Black dimmable in warm white for a hole size between 100mm and approx. 110mm ceiling cut-out. The dimmable black Downlights are becoming increasingly popular in the market. The black is a RAL 9017 colour. The model is currently only available in warm white 3000K. It is offered with various dimming options in addition to the standard power supply.
The 3000K warm white has a very good light quality without glare. With only 10 watts of power, the refectory luminaire in black produces 1000 lumens of luminous flux. The manufacturer grants a 5-year guarantee on the LED recessed spotlight in black and the power supply unit.
We offer the popular black LED recessed spotlights in the sizes 116mm outer dimension / 143mm diameter
/ 190mm LED recessed spotlight black and as a version with 21W at 230mm diameter. In the following category you will also find smaller LED spots in black colour.
With a low glare of UGR<19, the LED downlight is ideally suited for use in offices., at monitor workplaces, in shops, foyers, reception counters and in care. The low glare provides a bright but unobtrusive light. Also very pleasant in hotels / foyers or reception halls. Also very nice in shops for unobtrusive ambient lighting. The improved reflectors provide a very nice light distribution and a high-quality design.
The legal requirements for use at computer screen workplace according to EN 12464-1 are fulfilled. You can download a light calculation file in the Miscellaneous section.
The second generation of this much-sold recessed LED luminaire in black with reflector features not only low glare but also improved colour rendering and a significantly increased efficiency of around 100 lumens per watt. In addition, with the new DALI-capable power supply units, we can offer a further integration option in the lighting control system.
Premium LED recessed luminaires of this quality and performance class normally cost considerably more. The simple black design in combination with the black reflector make it a very popular LED downlight, especially for larger projects.
Besides the standard version with flicker-free on-off power supply, we can offer further dimming options. We can offer this 143mm LED recessed luminaire black with the following dimming options:
The black LED Downlight is equipped with the latest DALI 2 power supply units, which support the improved DALI2 standard. Absolutely flicker-free over the entire dimming range as well as the and push dimming. Downward compatibility with DALI1 luminaires is guaranteed.
The power supply unit is ENEC and TÜV/GS certified and thus guarantees a tested high level of electrical safety. The LED driver can be reset to a slightly lower brightness by means of DIP switches if the basic setting is too bright and no complex dimming is required. This Black recessed LED luminaire for VDU workstations is often integrated into large building or home automation systems via DALI or KNX. This allows models to be controlled, switched and dimmed individually.
The advantage of DALI dimming is that the light remains flicker-free and does not flicker. Lower dimming levels can also be achieved than with phase dimming.
The DALI 2 dimming protocol enables improved compatibility of DALI luminaires from different manufacturers with each other in a common DALI dimming network. The power supply unit is flicker-free and supports push dimming in addition to DALI dimming. Push dimming also runs via a dimming line and is ideal where it is not worth setting up a DALI network with a gateway due to the small number of luminaires.
For analogue 1-10V dimming, a 2-wire control cable and a suitable 1-10Volt wall dimmer are required. The dimming is very clean and even without flickering and flickering in the light. The minimum dimming is about 10%. In existing buildings, however, there is usually no 5-core cable for a dimming line! This often makes implementation in existing buildings difficult. The power supply unit can be reset to a slightly lower brightness with DIP switches if the basic setting is too bright and no complex dimming is to be realised.
This type of dimming is very close to the classic dimming of incandescent lamps via the power line. We offer suitable power supply units for this, which show a very good dimming curve, without jumps in the dimming and have a low noise level. A prerequisite, however, is an LED-capable wall dimmer that can dim LED luminaires. In this way, you avoid flickering or jumps in the dimming curve. This type of dimming for LEDs usually allows a minimum dimming of 10 to 15% of the total brightness. However, the number of luminaires that can be operated simultaneously on one dimmer is usually limited to about 5-6 luminaires.
Dimming is done with a rotary or touch dimmer. When used with a home automation system and dimming actuators, a dimming test is recommended in advance.
This modern LED recessed spotlight in black easily replaces two 50Watt classic halogen luminaires and significantly exceeds the brightness by approx. 20%.
Power supply: AC 220-240V /50-60HZ | Beam angle: 60° | Power: 10 Watt | Light colour: 3000K warm white (halogen warm white) | Luminous flux:* 10Watt= 1000 Lumen | Dimmable: Yes possible ,depending on the selected dimming type / dimming option | Dimensions: Outer diameter: 116mm | Hole size or ceiling cut-out: 100mm to approx. 112mm Installation height: 92mm | Stated lifetime: at least 50,000 hours | Switching cycles 50,000 | Colour rendering index: RA: 82 | Glare value UGR19 Suitable for VDU workstations |Application temperature: 10°C to 40°C |Certificates: CE, Rohs, EMC | Power consumption 1000 hours: 10kWh | Protection class: IP20 | Weight:0.47 kg | Housing colour: Black RAL 9017
Download light file for 116mm LED recessed light black dimmable warm white
