Item information | Value |
---|---|
Category: | Industrial spotlights & high bay lights |
color temperature: | 6000 Kelvin |
average life cycle: | 50.000 hours |
Power supply: | 230V / 50 Hz (from 185V to 265V) |
dimmable: | no |
energy efficiency class: | A+ |
beam angle: | 90° degrees |
colour rendering (CRI): | RA >80 |
weight: | 3.3 kg |
power factor (cos phi): | 0.95 cos phi |
power consumpt.: | 100 Watt |
Operat. temperature: | -25°C to 50°C |
Additional information:: | 5 Jahre Herstellergarantie |
IP-Class: | IP 65 |
SMD-LED type: | SMD 3030, SMD 2835 140 pieces |
tests / audits: | CE, EMC/EMV, Rohs, ENEC certified driver |
Unified Glare Rating (UGR): | <26 |
consumption per 1000 hrs: | 100 kWh |
LED-driver: | Philips |
replaceable lamp: | No |
efficiency in lm/W: | 150 Lm/Watt |
Product category: | LED high bay fixtures |
Cnstant current: | 420 mA |
luminous flux: | 15.000 Lumen |
LED high bay luminaire with reflector 6000K daylight white 90° 100W LED Philips power supply unit only full PU
100W LED high bay luminaire with 90° glare-reduced reflector. The diffuse lateral light emission and the bundled 90° beam angle significantly reduce glare. This is often criticised with UFO high bay luminaires. Inexpensive, bright and reliable. As a measure to reduce glare with the UFOs, we offer transparent reflectors that direct the light downwards at a 90° angle and at the same time allow the light to emerge very diffusely to the side.
Important: As these reflectors are quite fragile when shipped, we only offer this combination in combination as complete VPEs of the high-bay spotlights as a package. No individual shipment! The 4th generation of these 100W LED high-bay floodlights provides up to 15,000 lumens of luminous flux and proves to be very reliable even in continuous use. The model is one of our absolute bestsellers and ensures a high level of electrical safety thanks to the Philips® Xitanium LED drivers with ENEC certification.
We offer these efficient LED high-bay luminaires as high-bay luminaires with 100W, 150W, 200W or 240 Watt output. Combined with a very good price/performance ratio and a low failure rate of less than 1/1000 units. The price may be a little higher than for No Name Highbay high bay luminaires. In return, you do not have to constantly replace the luminaires at a height of 6m if they are defective.
ENEC certified power supply unit for high electrical safety
These LED high bay luminaires with reflector work with Philips®drivers that are ENEC certified and have a high level of electrical safety. The power supplies are protected against: Overheating, overvoltage, short-circuit safety and excessive current. The Philips power supplies are long-term stable and reliable in continuous use. The built-in LEDs are only energised up to 80%. This leads to a longer durability in continuous use.
Dimming is via the analogue 1-10V interface. We also offer this model as a DALI high-bay luminaire with the latest Philips DALI2 power supply unit. Or as an on-off version.
LED high-bay luminaire dimmable: various dimming modes
Dimming: The dimmable version is dimmable via 1-10V interface (2-wire dimming cable) as standard. This enables the use of daylight sensors directly on the high-bay luminaire or of dimmable 1-10V DALI converters. On request, we also offer a DALI2 dimmable high-bay spotlight version.
100W LED high-bay spotlight with 90° glare-reduced reflector - transparent reflector shades
UFO high-bay lighting has a wide beam angle of 120° as standard. With low mounting or very high output, this can lead to glare with the UFOs. As a measure to reduce glare in the UFOs, we offer transparent reflectors that direct the light downwards at a 90° angle and at the same time allow the light to escape very diffusely to the side. As these reflectors are quite fragile when shipped, we only offer this combination as a complete VPE of the hall floodlights as a package. No individual shipment!
Accessories:
For the UFO high bay luminaires, we offer transparent reflector shades, analogue 1-10V daylight sensors, CASAMBI radio dimmers for Bluetooth control via app and smartphone, as well as external surge protection modules.
Certificates: ENEC and UK/CA certified power supply unit, | Protection class: IP65 | Mounting: Ring eyelet and drop guard | Energy efficiency: A+ | Dimming: 1-10 volt dimmable or non-dimmable | Light colours: - 6000K Daylight white | Luminous flux: 15,000 lumens| Dimensions: 250mm x 122mm | Input: 220-240V | CE, RoHs, EMC | Protection against overvoltage, short-circuit, overheating, | Radiation angle: 90°.