The 150x30 LED panel provides up to 4800 lumen luminous flux (4000K) with 40W power consumption. The panel measures 149.5 x 29.5 cm and is specially equipped with a glare-reducing surface. The power supply units are flicker-free for trouble-free working. Thanks to the glare-free surface with UGR<19, this LED panel is ideally suited for office work at a computer workplace in accordance with workplace guidelines.
We offer the glare-free LED panel 150x30cm UGR<19 in the light colour 4000K (840). A flicker-free Philips® CertaDrive brand power supply unit is included as standard.
The LED panel produces a very attractive, homogeneous, evenly distributed light with no major glare effects. A low power consumption of just under 40 watts makes it an efficient light source and generates a luminous flux of up to 4800 lumens. The surface is made of non-yellowing PMMA plastic.
- General lighting in corridors or shops - Office and workplaces - LED panels in conference rooms - in doctors' surgeries or waiting rooms - Replacement for 2 x58 watt louvre luminaires
The large surface area generates a lot of light without causing too much glare. Nevertheless, dimming may be an option in some circumstances to dim the output slightly when there is a lot of daylight. As accessories, we supply dimmable power supply units with DALI dimming, 1-10 volt dimming (via separate dimming cable) or alternatively dimming via phase angle/section dimming.
1st Dali 2 dimmable power supply unit for use in the DALI BUS. Requires a 2-wire dimming cable
2. 1-10V dimming requires a thin control cable and a suitable 1-10Volt wall dimmer. Alternatively, dimming can also be carried out wirelessly using a wireless wall dimmer or a remote control. Dimming is very clean and even. In existing buildings, however, there is usually no 5-core cable available for a dimming line!
3. dimming via leading edge phase control dimming / trailing edge dimming. This type of dimming comes very close to the classic dimming of light bulbs via the power line. We offer suitable power supply units for this, which have a very good dimming curve, no jumps in dimming and low noise levels. However, an LED-compatible wall dimmer that can dim LED luminaires is required.
Light colour 840: 4000 Kelvin ( neutral white) | Power consumption: 40 watts | Frame colour: white | Dimensions: 1495mm x 295mm x H: 11mm (45mm with LED power supply unit) | Manufacturer's guarantee: 5 years | Luminous flux: 4800 lumens (at 4000K neutral white) | Power supply: 200V to 240V | Luminous efficacy Lm/W: 120 lm/W | COS-phi: >0.9 | Colour rendering RA 85 | Beam angle: 120° | IP 41 | Frame: Aluminium Dimmable: No - dimmable power supply unit available | Specified service life (manufacturer's specification): 50,000 hours | Operating temperature: -20 ~45'C | Humidity in use: 10-70% | | Long-term stable and non-yellowing PMMA light guide plate | Power: 40 watts
There are many different mounting options for the LED panel.
Ceiling mounting frame
We can also offer a simple, pluggable and functional surface-mounted frame for ceiling installation as a 1500 x 300mm LED ceiling light.
Plasterboard ceilings:
The panel can be clipped into a plasterboard ceiling using spring clips (article: FK_GK4), which are mounted on the back. This provides an almost flat surface. However, a cut-out must be made in the plasterboard ceiling for this!
Rope suspensions:
The panel can also be easily suspended from the ceiling using cable suspensions. We recommend 3 Y-rope suspensions.
Advice:
Do you have any questions about our LED panels? As a technical energy manager TÜV Süd, efficiency is our business. We are happy to advise you! Preferably in person! You can reach us on the telephone number: +49221-29821660 during our business hours or by mobile phone. You can also contact us by e-mail form or fax enquiry. We will also be happy to call you back.
