ED SERIESED8KX · 245mm LED Recessed Downlight · CRI 92+ · Trailing-Edge Dimming · Large Diameter
The ED8KX (245 mm) is a 20-watt LED recessed downlight with trailing-edge dimming for large ceiling apertures of 200 to 230 mm — with Samsung® LEDs, CRI 92+ (Ra > 90), IP44 protection and 2,000 lumens of luminous flux. The go-to choice for large retail spaces, hotel lobbies, conference rooms and open-plan offices.
Driver included in the set — no additional purchase requiredScope of delivery: ED8KX 245mm + dimmable 230 V driver + spring clips. Pre-wired — Plug & Dim. (Note: Spec icons show “NO DRIVER” from the manufacturer — with the ED8KX, Cologne LED always includes the driver.)
Part of the ED Recessed Downlight Series — 5 sizes, 2 dimming variants110 / 140 / 180 / 245 / 300 mm · Trailing-edge & DALI · all models compared side by side
Need KNX / Smart Building or DALI bus control?Same luminaire body, DALI-2 driver — direct integration into KNX, DALI bus and building automation without minimum-load issues.
Proven quality — in daily use across demanding large-scale projects. The ED8KX 245mm is the workhorse of the ED Series: in daily operation in large retail floors, hotel lobbies, exhibition stands, conference rooms and open-plan offices. 2,000 lumens at just 20 watts — and a colour rendering of CRI 92+ that shows merchandise and spaces in their true colour depth.
Certified:✓ IP44CERoHS✓ 5 Yr Warranty✓ CRI 92+✓ Samsung® LEDs✓ 2,000 Lumens✓ Driver incl.Updated: 17 May 2026
245mm LED recessed downlight dimmable, CRI 92+ — large-diameter downlight for apertures 200 to 230 mm
The ED8KX 245mm recessed downlight is a large-diameter LED downlight designed for ceiling apertures between 200 and 230 mm (max. 235–240 mm). Available in 3000K Warm White and 4000K Neutral White, it delivers a very good colour rendering of CRI 92+ (Ra > 90) — with measured values that frequently reach CRI 94 due to LED binning.
At 20 watts and 2,000 lumens at 100 lm/W, a single luminaire covers approximately 4–6 m² of floor area. Dimmable via standard trailing-edge wall dimmers or KNX dimmer actuator. With its 245 mm cover plate, the ED8KX fits directly into the 210 mm ceiling aperture of twin-lamp legacy fittings housing Philips® MASTER PL-C 18W/26W or Osram DULUX D/E lamps — the most common commercial downlight standard in office buildings and shopping centres from the 1990s to 2010s.
Typical applications for 245mm large-diameter LED downlights
🏪 Large-format retail & showrooms
🏨 Hotel lobbies & reception areas
🏢 Conference rooms & open-plan offices
🍽 Restaurants with high ceilings
🏋 Sports facilities & changing rooms (IP44)
🔧 Workshops & production halls
For even larger spaces or ceiling heights above 4 m → ED10K 300mm (40W) recommended.
Colour temperatures — spec overview 3000K and 4000K
3000K Warm White (930)
Warm atmosphere · ideal for hotels, hospitality, showrooms
4000K Neutral White (940)
Crisp, neutral light · ideal for offices, retail, conference rooms
✓ Note on the spec icons: The icon strip shows “NO DRIVER INCLUDED” from the manufacturer — with the ED8KX 245mm, the dimmable 230 V driver is always included in the delivery, pre-wired and ready to install.
Light quality: CRI 92+ — colour accuracy for professional demands
CRI 80 vs. CRI 92+ — the visible difference: In large-format retail or on exhibition stands, light quality shapes the impression of displayed goods. CRI 92+ renders colours naturally and true to life — not muddy or washed out as with CRI-80 standard products, which look especially cold and unappealing in large spaces.
92+
CRI / Ra (binning typically up to 94)
2,000
Lumens · 100 lm/W
<23
UGR · EN 12464-1 compliant
Note on CRI binning: The official specification is CRI 92 / Ra > 90. In practice, LED binning typically results in measured values of CRI 92–94. We specify conservatively — you generally receive more.
Very good colour rendering: CRI 92+ (Ra > 90), typical measured values CRI 92–94
2,000 lumens at 20 W — 100 lm/W efficacy
UGR < 23 — EN 12464-1 compliant for workplaces and retail spaces
Premium Samsung® mid-power LEDs
CRI 80 vs. CRI 90+ — see the difference for yourself
Drag the slider across the three scenes. In large spaces with many light sources, the quality difference becomes especially apparent — pay close attention to reds, teal and skin tones.
CRI 80CRI 90+
‹›
Dragon fruit, pomegranate, figs — under CRI 80 reds and pinks look dull; under CRI 90+ they glow vibrantly. Decisive for food retail, hospitality and catering.
Standard LED CRI 80Cologne LED CRI 90+
CRI 80CRI 90+
‹›
Sunflowers, roses, hydrangeas, peach tulips — CRI 90+ renders the full test-colour spectrum accurately. Essential for florists, exhibitions and showrooms.
Standard LED CRI 80Cologne LED CRI 90+
CRI 80CRI 90+
‹›
Gallery lighting: DIN EN 12464-1 requires CRI > 90 — the ED8KX 245mm meets this with CRI 92+, making it suitable for museums, showrooms and exhibition halls.
Standard LED CRI 80Cologne LED CRI 90+
What you see: At CRI 80, red and cyan spectral components are missing — reds turn brown-tinged, teal blurs into blue-grey. CRI 90+ renders the visible spectrum almost exactly as daylight — verifiable to CIE 13.3 / TM-30-20.
IP44 — suitable for damp locations and covered outdoor areas
With protection class IP44, the ED8KX 245mm is also approved for damp locations: bathrooms (outside protection zone 1), sports facility changing rooms, covered outdoor areas and indoor swimming pool surrounds with sufficient clearance from the water surface.
LED retrofit for twin-lamp PL-C fittings: direct replacement for Philips® MASTER PL-C and Osram DULUX D/E
💡 LED retrofit for legacy fittings with Philips® MASTER PL-C compact fluorescent lamps (2×18W · 2×26W, G24q/G24d)
The ED8KX 245mm is the recommended LED retrofit solution for commercial twin-lamp recessed downlights originally fitted with Philips® MASTER PL-C compact fluorescent lamps (PL-C 2P and PL-C 4P) — and their Osram equivalent DULUX D/E. Verified product data confirms: twin-lamp PL-C downlights (2×18W or 2×26W) have a ceiling aperture of exactly 210 mm with a housing outer diameter of 220 mm. The 245 mm cover plate of the ED8KX fully covers this opening — no re-cutting of the ceiling required.
Important: This compatibility applies exclusively to twin-lamp (2-lamp) fittings. Single-lamp PL-C downlights (1×26W) have a significantly smaller ceiling aperture of approximately 150 mm and are therefore not suitable for the ED8KX 245mm — see the ED6KX 180mm instead.
⚡ Energy (2×26W): 20W instead of ~58–64W (approx. −68 %)
⚡ Energy (2×18W): 20W instead of ~40–42W (approx. −51 %)
🕐 Rated life: 50,000h vs 10,000–13,000h (approx. 4× longer)
🎨 Colour rendering: CRI 92 vs Ra 80–82 (PL-C typical value)
🔒 Warranty: 5 years vs 24 months
🔇 No flicker: flicker index < 1 % vs 50 Hz lamp flicker
Technical compatibility basis (verified): Twin-lamp PL-C downlights (2×Philips® MASTER PL-C 18W G24q-2 or 2×PL-C 26W G24q-3, or Osram DULUX D/E 18W/26W) · housing outer diameter 220 mm · ceiling aperture 210 mm · typical installation period: early 1990s to approximately 2015 · widely used in office buildings, shopping centres, hotel lobbies and public administration buildings.
Gira 244000 S3000 Uni LED dimmer Mini Electronic — up to 3 luminaires
Note on 20W per luminaire: The higher wattage reduces the maximum number of luminaires per dimmer. For installations with many luminaires, we recommend the DALI-2 version with a central controller — no minimum-load issues.
KNX / Smart Home
Compatible with KNX trailing-edge dimmer actuators (e.g. MDT, Gira). For large KNX projects we strongly recommend the DALI-2 version of the ED8KX 245mm — cleaner addressing, no minimum-load issues, direct group control.
Important: Use only LED-compatible trailing-edge dimmers. Standard leading-edge dimmers for incandescent bulbs are not approved and may cause flickering or damage.
Features & benefits at a glance
Very good colour rendering CRI 92+ / Ra > 90 (binning typical CRI 92–94)
IP44 — for damp locations and covered outdoor areas
Steplessly dimmable via trailing-edge dimmer · DALI-2 version available separately
5-year manufacturer warranty
3000K Warm White or 4000K Neutral White
Rated life 50,000 hours (L90 | B10)
2,000 lumens · 20 W · 100 lm/W
Premium Samsung® LEDs
Wide aperture range: 200 to 230 mm (max. 235–240 mm)
Show full technical specifications▾
Outer diameter
245 mm
Ceiling aperture
200 · 210 · 220 · 230 mm (max. 235–240 mm)
Installation depth
[check data sheet]
Power
20 Watts
Luminous flux
2,000 Lumens · Efficacy: 100 lm/W
Colour rendering
CRI 92+ / Ra > 90 (binning typical CRI 92–94)
Colour temperature (selectable)
3000K Warm White or 4000K Neutral White
Beam angle
110° wide-beam
Protection class
IP44
Glare value (UGR)
UGR < 23 (EN 12464-1 compliant)
Flicker behaviour
[check data sheet]
Rated life
50,000 hours · L90 | B10
Mains voltage
230V / 50–60 Hz (220–250V)
Dimming
Yes (trailing-edge) · DALI-2 version available separately
Can the ED8KX 245mm replace a 2×PL-C 26W fitting (Philips® MASTER PL-C or Osram DULUX D/E)?
Yes — directly, with no modifications to the ceiling aperture. Twin-lamp commercial downlights with 2×Philips® MASTER PL-C 26W (G24q-3) or the Osram equivalent DULUX D/E 26W have a verified ceiling aperture of 210 mm with a housing outer diameter of 220 mm. The ED8KX 245mm cover plate fully covers this opening. The ballast and lamp holders are no longer required — the ED8KX is simply fitted into the existing 210 mm aperture.
Compared to a 2×PL-C 26W fitting, the ED8KX saves approximately 68 % energy (20W vs ~58–64W total including ballast losses), lasts approximately 4 times longer (50,000h vs 10,000–13,000h), and delivers CRI 92 vs Ra 80–82 plus a 5-year warranty instead of the standard 24 months.
Also compatible with 2×PL-C 18W fittings (G24q-2, Osram DULUX D/E 18W) — same housing outer diameter 220 mm, same aperture 210 mm.
What should I check for a PL-C retrofit — PL-C 2P (magnetic) vs. PL-C 4P (electronic)?
For the LED replacement this distinction is irrelevant — the ED8KX 245mm replaces the entire fitting including ballast and lamp holders. Whether the legacy fitting had a magnetic ballast (2P, G24d base) or an electronic HF ballast (4P, G24q base) does not matter: both are removed when fitting the ED8KX. The only important point is that it is a twin-lamp fitting with a 210 mm ceiling aperture.
Note: Single-lamp PL-C fittings (1×26W) have an aperture of approximately 150 mm — the ED6KX 180mm is the better match for these.
Will the ED8KX fit my 200 mm ceiling aperture?
Yes — the ED8KX covers apertures from 200 to 230 mm. A 200 mm cutout is the minimum supported size and fits without any modification. At 235–240 mm, please check the cut quality before installation.
How large a space does one 245mm downlight cover?
With 2,000 lumens, a single luminaire at normal ceiling height (2.5–3 m) covers approximately 4–6 m² of floor area. For a 20 m² room, 4–5 luminaires are recommended. For higher ceilings or greater illuminance requirements (e.g. workshop), consider the ED10K 300mm at 40W.
When should I choose the DALI version?
When you need more than 5 luminaires per circuit, KNX building automation, or scene control per room zone. The DALI-2 version of the ED8KX uses the same luminaire body — only the driver differs.
Is the driver really included in the delivery?
Yes — the matching dimmable 230 V driver is always included, pre-wired. The manufacturer spec icon shows “NO DRIVER INCLUDED” as a generic graphic — this does not apply to our delivery.
Project advice or dimmer recommendation?
For larger projects (offices, hotels, retail) we advise you personally on lighting design, dimmer selection and whether trailing-edge or DALI is the better solution.