Redis exception: OOM command not allowed when used memory > 'maxmemory'.
Led Panel 150x30 Dali dimmable with a white outer rim provides up to 4800 lumens of luminous flux (4000K or 6000K) at 40W power consumption. The Led Panel 150x30 Dali measures 149.5 x 29.5cm and easily replaces luminaires with 2 x 58W classic fluorescent tubes.
We supply the LED Panel 150x30 Dali in the light colours 3000K warm white or alternatively 4000K neutral white. On request, we can also supply a 6000K daylight white. For ceiling mounting as LED ceiling light 1500 x 300mm we can also offer a simple, pluggable and functional mounting frame. You can find it on the following page....
- General lighting in corridors or shops
- LED panel in conference rooms
- in doctors' surgeries or waiting rooms
- living rooms
- energy-saving replacement for 2 x 58W louvre luminaires
- Central lighting management in building automation
- Integration via KNX / DALI in home automation systems (MDT. GIRA, Busch Jaeger)
Due to the large surface area, a lot of light is generated without being particularly dazzling. Nevertheless, dimming may be an option to reduce the output somewhat when there is a lot of daylight. In corridors or hallways, too, the light requirement is not always so high and can be further reduced to save energy. As accessories, we supply dimmable power supply units via DALI dimming as a DALI 2 luminaire or alternatively dimming via phase annealing/section dimming.
We offer the LED panel 1500x300 as an independent DALI luminaire with a DALI 2 power supply unit from Philips. The DALI power supply is according to the latest DALI 2 standard. This allows a high compatibility with many existing DALI bus systems. The power supply is ENEC and TÜV/GS certified and thus guarantees a high level of electrical safety. The LED driver can be reset to a slightly lower brightness as standard using DIP switches.
2. dimming via phase cut-off dimming. This dimming method is very similar to the classic dimming of incandescent lamps via the power line. We offer suitable power supply units for this purpose that have a very good dimming curve, no jumps in dimming and low noise. However, an LED-capable wall dimmer that can dim LED luminaires is a prerequisite. You will find the LED panel 1500x300mm version as phase-section dimming on the following page......
The LED panel produces a very nice homogeneous, evenly distributed light that does not show any major glare effects. A low power consumption of just under 40Watt makes it an efficient light source and generates a luminous flux of up to 4800 lumens.
Light colour depending on model 840: 4000 Kelvin ( neutral white ) / 830 = 3000K warm white. / or 860 6000K daylight white | Power consumption: 40 Watt | Frame colour: white | Dimensions: 1500mm x 300mm x H: 11mm (45mm with LED power supply) | Manufacturer's warranty: 5 years | Luminous flux: 4800 lumen (at 4000K neutral white) and 4400 lumen at 300K warm white | Power supply: 200V to 240V | Luminous efficacy Lm/W: 120 lm/W | COS-phi: >0.9 | Colour rendering RA 85 | Beam angle: 120° | IP 41 | Frame: Aluminium | Dimmable: Yes Philips DALI2 power supply | Indicated service life (manufacturer's specification): 50,000 hours | Operating temperature: -20 ~45'C | Operating humidity: 10-70% | | Long-term stable and non-yellowing PMMA light guide plate| Output: 40Watt
There are many different mounting options for the LED panel.
Ceiling mounting frame
For ceiling mounting as LED ceiling luminaire 1500 x 300mm we can also offer a simple, pluggable and functional mounting frame.
The panel can be clipped into a plasterboard ceiling with the help of spring clips (article: FK_GK4), which are mounted on the back. This gives you an almost flat surface. But a cut-out must be cut into the plasterboard ceiling for this!